1. <wbr id="efg83"><fieldset id="efg83"></fieldset></wbr>
        <pre id="efg83"><tfoot id="efg83"></tfoot></pre>
          1. <ul id="efg83"><blockquote id="efg83"></blockquote></ul>

            亚洲乱亚洲乱妇在线,亚洲2018天堂在线2017,久久人妻网,国产av无码久久精品,日也干夜也爱在线视频,无遮挡十八禁污污网站免费 ,国产av国内精品jk制服,色综合亚洲一区二区小说
            Chinese

            Advisory hotline: 4008-557-528

            hot key words: Dongguan skived fin heat sink vendor Shenzhen skived fin heat sink vendor Dongguan PV inverter heat sink PV inverter heat sink vendor Jiangsu skived fin heat sink vendor Custom SVG heat pipe thermal module

            3C products are also called information home appliances, which typically mean computers, telecommunications, and consumer electronics. There are a wide variety of products with a huge demand. China has become the worldwide largest 3C consumption market for 3C products. With the enhancement of the financial condition and income of our citizens, there is a higher demand for the quality of electronic products. Companies launch products with better configuration, better performance, andbetter designs in order to satisfy consumers
            There are a great number of factors which affect the quality of electronic products and cooling is a factor that could not be neglected. Especially after the development of the "Samsung battery-gate" event in 2016, electronics manufacturers pay more attention to the cooling performance and safety of their products. How to make sure the cooling of an electronic product meet the stringent design requirements? The best approach is to plan for thermal management at the beginning of the product design cycle so as to acquire the optimal cooling solution. Winshare Thermal is an outstanding cooling techniques supplier, who can provide the cooling solutions for IT telecommunication electronics products including mainboard cooling, CPU cooling, graphics card cooling, radio frequency module cooling,RU cooling, game console cooling,VR cooling, IPC cooling, server cooling, central variable frequency air conditioner cooling,TEC cooling, etc.
            The target to be achieved by the simulation of the cooling solution:
            PCB source temperature ≤100
            CPU temperature ≤80℃
            Schematic of simulation model and relevant parameters:
            (1)

            DCDC output

            Thermal conductivity:10W/(m*K) Power:5W

            CPU chipset

            Thermal conductivity:10W/(m*k) Power:10W

            PCB MST

            Thermal conductivity:15W/(m*K) Power:5W

            CPU PCB

            Thermal conductivity:15W/(m*K) Power:4W

            CPU heat sink

            Dimensions: 125*95*6mm, base plate thickness:2mm, fin count: 10pcs, thickness: 0.6mm;Thermal conductivity: AL-extru. 180W/(m*K)

            CU block

            Dimensions:41*41*4.7, Thermal conductivity:385 W/(m*k)

            Thermal grease

            Thickness: 0.3mm,Thermal conductivity:3.5W/(m*K)

            Soldering approach

            Solder paste 4258,Thermal conductivity:48W/(m*k) 0.2mm

             
            (2)

            Front side of the grille

            Dimensions:170*27mm; Open area ratio:0.5

            Right side of the grille

            Dimensions:35*30 mm; Open area ratio:0.6

            Back side of the grille

            Dimensions:30*30 mm; Open area ratio::0.7

            fan

            Dimensions:30*30*10 mm

             
            (3)

            Top side of mainboard

            Dimensions:140*170mm; Thermal conductivity:10W/(m*k); Power:3W

            Back side of heat source

            0.8W/pcs

            Front side of heat source

            Left row:0.8W/pcs; right row: 1.2W/pcs;
            The Row marked as "2":1.5W/pcs

            Heat sink

            Dimensions:140*170*4.5mm; Base plate thickness: 2mm; Fin height:2.5mm,
            Fin count:10pcs; fin thickness:0.6mm; Thermal conductivity:180W/(m*K)

            Thermal grease

            Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

             
            (4)

            ottom side of mainboard

            Dimensions:140*170mm; Thermal conductivity:10W/(m*k); Power:3W。

            Source of inverse

            功率:1.5W/pcs

            Heat sink

            Dimensions:140*170*4.5mm; Base plate thickness: 2mm; Fin height:2.5mm,
            Fin count:10pcs; Fin thickness:0.6mm; Thermal conductivity:180W/(m*K)

            Thermal grease

            Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

             
            Descriptions of the heat sink cooling solution:

            (1) Add an30*10mm axial fan to increase the air flow through RX module;
            (2) Modify the copper fins in front of the fan in order to increase system air flow.

            Schematic of the simulation model of the overall cooling layout:
            Parameters of the copper fins after the modification:

            Copper fins

            Dimensions:30*12*0.3mm; Inclination: 1.0; Quantity: 30pcs

            Material:C1100; Thermal conductivity:385W/(m*K)。

            Heat pipe

            D6 heat pipe thickness: 3mm with the pressed-tube technique; Heat pipe type: Powder sintered;
            Thermal conductivity:10000W/(m*k)

            Add a 30*10mm axial fan; the open area ratio of the new fan inlet is 0.7.

            Baffle

            Dimensions:160*33*0.5mm; Material: SUS

             
            CPU fan operating point: Volume flow rate:2.43ft^3/min Pressure:17.47Pa
            Schematic of simulated CPU module temperature and air flow distribution:
             Ambient temperature: 40℃; Maximum temperature of the CPU chipset:64.43℃
            Schematic of the simulated temperature distribution on the top side of the RX module:

            NO.

            Maximum temperature

            NO.

            Maximum temperature

            NO.

            Maximum temperature

            Source 1

            59.43

            Source 1.7

            59.73

            Source 3.1

            59.59

            Source 1.1

            59.54

            Source 2

            60.02

            Source 3.2

            59.7

            Source 1.2

            59.66

            Source 2.1

            60.19

            Source 3.3

            59.77

            Source 1.3

            59.73

            Source 2.2

            60.16

            Source 3.4

            59.8

            Source 1.4

            59.76

            Source 2.3

            59.96

            Source 3.5

            59.8

            Source 1.5

            59.77

            Source 2.4

            59.76

            Source 3.6

            59.78

            Source 1.6

            59.76

             Source 3

             59.48

            Source 3.7

            59.74

            Schematic of the simulated temperature distribution on the bottom side of the RX module:
             

            NO.

            Maximum

            NO.

            Maximum

            Source 4

            60.83

            Source 4.4

            60.95

            Source 4.1

            60.53

            Source 4.5

            60.89

            Source 4.2

            60.92

            Source 4.6

            60.8

            Source 4.3

            60.96

            Source 4.7

            60.67

            Fan operating point:
            CPU fan: 2.43ft^3/min ,17.47Pa;
            RX fan1: 2.23ft^3/min ,18.65Pa;
            RX fan2: 2.5ft^3/min ,17.09Pa;
            RX fan3:2.22ft^3/min,18.70Pa。
             
            Air flow through fan grilles:
            CPU grille:2.26ft^3/min;
            RX grille1:1.95 ft^3/min;
            RX grille2:2.23 ft^3/min;
            RX grille3:1.962ft^3/min;
            Total: 8.4ft^3/min。
             
            Miniature of the overall air flow trajectory from the simulation results:
             
            Summary of the simulation results for the cooling solution:

             

            CPU maximum temperature
            (℃)

            Temperature range of the heat source
            (℃)

            System air flow
            (ft^3/min)

            Simulation results of the solution

            64.43

            60.92~59.43

            8.4

            The results meet the requirements of CPUtemperature less thanand heat source temperature less than 100℃ and the thermal design is complete.

             

            The voice of Winshare Thermal: credit and word

            Winshare Thermal Ltd. (hereinafter referred to as Winshare Thermal) was founded in 2009. We specialize in the research and development, production and technical services of high power cooling solutions. We are devoted to becoming the leader in the thermal... [See details]

            Copyright: Dongguan Winshare Thermal Ltd.

            主站蜘蛛池模板: 101超级碰碰碰碰久久久久| 亚洲无码久久| 国产精品视频免费一区二区三区 | 护士交换粗吟配乱大交| av色蜜桃一区二区三区| 色欲色香天天天综合VVV| 天堂网av一区二区三区| 中西区| 国产精品无码一本二本三本| 视频二区亚洲精品| 一夲道中文无码av免费看| 海角社区在线视频播放观看| 色哟哟AV永久精品无码| 亚洲va天堂va欧美ⅴa| 国产在线精品国自产拍影院同性| 上司部长出轨漂亮人妻| 色诱久久av| 精品日本一区二区三区在线观看| 久久久久亚洲精品男人的天堂| 国产精品视频熟女韵味| 精品无码国产自产拍在线观看| 香蕉久久精品曰曰躁夜夜躁 | 67194成在线观看免费| 东京热高清无码精品| 国产动作大片中文字幕| 视频精品全部免费品全正版| 亚洲色欧美在线影院| 亚洲成色在线综合网站| 日本大胆欧美人术艺术| 日韩精品一区二区665566| 97国产无线乱码在线观看| 99久久精品少妇高潮喷水| 无码人妻一区二区三区免费N鬼沢| 晋中市| 国产成人亚洲精品另类动态| 97久久曰曰久久久| 无码人妻aⅴ一区二区三区| 丰满人妻一区二区三区视频| 欧美日韩亚洲综合一区二区三区激情在| 欧美成人精品视频一区二区三区| A片免费视频在线观看|